Category Archive for ZTW brushless ESC

ZTW Gecko 85A ESC with 8A SBEC with XT-60 Connector

ZTW Gecko 85A ESC with 8A SBEC with T Connector – ZTW4085201

This ZTW Gecko series ESC is a high-quality, efficient brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers saving you weight and simplifying your electronic connections. The Gecko series includes an aluminum heat sink body which is lightweight and helps dissipate heat more efficiently. The BEC on the Gecko has been specifically designed to support higher current applications to eliminate the possibility of unwanted shutdowns, and it is also capable of supporting simultaneous multiple servo operations typically found in large-scale airplanes and CCPM equipped large-scale 3D helicopters. If you are looking for a top of the line, full-featured ESC at a competitive price, the ZTW Gecko is the logical choice.

FEATURES:

  • Data logging system such as temperature, voltage, current, and RPM
  • SBEC Voltage Output 5.0, 6.0, 7.4, and 8.4V
  • Advanced Governor Mode and soft start
  • High SBEC Current Output, continuous 8A and burst 16A, designed to meet your high current applications
  • Power arm protection, over-heat protection, low-voltage protection and lost-signal protection
  • Secondary sub-menu setting by the LCD program card or your PC
  • Super smooth and accurate throttle linearity
  • Support for most motors, including high RPM motors
  • Programmable motor timing
  • Utilizes new smaller MOSFET technology to minimize weight
  • Aluminum finned heat sink
  • Programmable throttle input range
  • Anti-spark circuitry (on HV OPTO models only)
  • ESC firmware and program settings can be updated via PC connection (USB adapter sold separately)

INCLUDES:

  • ZTW 85A ESC with 8A SBEC
  • Pre-installed XT-60 Connector (power connector) and 4.0mm bullet (motor connector) for your convenience
  • Instruction Manual

OPTIONAL:

PRODUCT SPECIFICATIONS:

More info:  www.ztwshop.com

Length 66mm / 2.59in
Width 33mm / 1.29in
Height 16mm / 0.62in
Weight 74g
MAX Output Continuous Current 85A
Burst Output 100A (10s)
Battery 5-18NC/2-6Lipo
BEC Output 5.0V 6.0V 7.4V 8.4V Adjustable/8A
Power Connector XT-60
Motor Connector 4mm bullets

ZTW Mantis 45A ESC with 5A SBEC for Rc airplane

ZTW Mantis 45A ESC with 5A SBEC – ZTW2045201

The ZTW Mantis series is designed as a performance upgrade for your stock/OEM ESC. Its performance, feature set, and stability make it the perfect enhancement for your RC electric airplane or helicopter. It features compact size, light weight, simplified PCB design, super-smooth start up and throttle linearity, multiple circuit protections, governor, high amp BEC output and more. If you want to boost the performance of your stock ESC, the ZTW Mantis is an ideal choice offering a long list of advanced features and solid, reliable construction.

Note: If using with an Eflite Power 10, 15, or 25 motor, use the ZTW Programming Card to set the Motor Timing to 15 degrees and the Startup Strength to 25%.

FEATURES:

  • Supports high RPM motors and can be used with most RC motors
  • Secondary sub-menu setting for easier programming
  • Advanced Governor Mode
  • More optional motor timing and soft acceleration setups
  • Super smooth and accurate throttle linearity
  • Power arming protection (prevents the motor from accidentally running when switched ON)
  • Auto throttle shut down in a signal loss situation
  • Safety thermal over-load protection
  • Uses the new generation of the MOSFET to ensure the ESC stays within operating temperatures and can support peak current draws
  • New v3.1 advanced programming software

INCLUDES:

  • ZTW Mantis 45A ESC with 5A SBEC
  • Pre-installed XT60 Connector (power connector) and 3.5mm bullet (motor connector) for your convenience
  • Instruction manual

OPTIONAL:

PRODUCT SPECIFICATIONS:

 

More info:  www.ztwshop.com

Length 57mm / 2.24in
Width 31mm / 1.22in
Height 12mm / 0.47in
Weight 56g
MAX Output Continuous Current 45A
Burst Output 65A (10s)
Battery 2-6Lipo/5-18NC
BEC Output 5V 5.5V 6V Adjustable/5A
Power Connector XT60 Connector
Motor Connector 3.5mm bullets

ZTW Seal 160A Boat ESC with 3A SBEC

 

ZTW Seal 160A Boat ESC with 3A SBEC

Source from: www.ztwshop.com/product/ztw-seal-series-brushless-esc/

We all know that that boaters crave for more power than cars and airplanes and ZTW has come up with a whole new way to put the power to the water – The new SEAL line water-cooling brushless speed controls for marine applications. ZTW uses new FETS that offer less resistance and less heat dissipated. Even so they added more water-pipes to increase the cooling area to dissipate the heat faster and better so as to bring a even more incredible power levels without any risk of frying the controller.

Well designed MCU with efficient code makes for faster sync and accurate control. Beside the performance they have also bring you a whole new fashion looking marine ESC.

This is their SEAL marine speed controller. Quality, performance and fashion are what they are all about.

Features:
1. Extremely low internal resistance
2. High efficient three pipe water cooling system
3. Super smooth and accurate throttle linearity
4. Over temperature protection
5. Auto throttle shut down in signal lose situation
6. Supports high RPM motors
7. Power arming protection (prevents the motor from accidentally running when switched ON)
8. New Advanced programming software

Specifications:
Continuous Current – 160A
Burst Current (10s) – 180A
Battery – 5-18 NC/2-6 LiPo
BEC Output – 5.5V/3A
Width – 65mm
Length – 46mm
Height – 23..5mm
Weight – 130g

kerui alarm
Vu Solo 4K
hobbywing ESC
Headrest DVD player
kerui alarm Store
DLP HD projector
Hikvision Store
Naviskauto Headrest DVD
Freewing Rc airplane
Flightline Rc airplane
SunrayBox
dreambox dm900 hd

ZTW Beatles 70A Brushless ESC for Rc Airplane and RC helicopter

ZTW Beatles series ESC is a beginning level product line for fixed wing. This line product is specially designed for the beginner who is sensitive to price and performance. Also it is ready to use right out of box, every default is set for the best convenience of the customer, no programming needed. If you like to program for a change you can use our air program card (sold separately).It features light weight, small size, super smooth start up and throttle linearity, multiple protection, low cost and best performance at this level of product.

 

Features:
Extremely low internal resistance
Super smooth and accurate throttle linearity
Safety thermal over-load protection
Auto throttle shut down in signal lose situation
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
New Advanced programming software

Specifications:
Length 43mm
Width 25mm
Height 10mm
Weight 24g

Output
Continuous 30A
Burst 40A(10S)

Battery
2-4Lipo/5-12NC

BEC Output
5V/2A

kerui alarm
Vu Solo 4K
hobbywing ESC
Headrest DVD player
kerui alarm Store
DLP HD projector
Hikvision Store
Naviskauto Headrest DVD
Freewing Rc airplane
Flightline Rc airplane
SunrayBox
dreambox dm900 hd

ZTW Gecko 85A ESC with 8A SBEC with T Connector

This ZTW Gecko series

more info: www.ztwshop.com/product/ztw-gecko-series-brushless-esc/

ESC is a high-quality, efficient brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers saving you weight and simplifying your electronic connections. The Gecko series includes an aluminum heat sink body which is lightweight and helps dissipate heat more efficiently. The BEC on the Gecko has been specifically designed to support higher current applications to eliminate the possibility of unwanted shutdowns, and it is also capable of supporting simultaneous multiple servo operations typically found in large-scale airplanes and CCPM equipped large-scale 3D helicopters. If you are looking for a top of the line, full-featured hobbywing ESC at a competitive price, the ZTW Gecko is the logical choice.

FEATURES:

  • Data logging system such as temperature, voltage, current, and RPM
  • SBEC Voltage Output 5.0, 6.0, 7.4, and 8.4V
  • Advanced Governor Mode and soft start
  • High SBEC Current Output, continuous 8A and burst 16A, designed to meet your high current applications
  • Power arm protection, over-heat protection, low-voltage protection and lost-signal protection
  • Secondary sub-menu setting by the LCD program card or your PC
  • Super smooth and accurate throttle linearity
  • Support for most motors, including high RPM motors
  • Programmable motor timing
  • Utilizes new smaller MOSFET technology to minimize weight
  • Aluminum finned heat sink
  • Programmable throttle input range
  • Anti-spark circuitry (on HV OPTO models only)
  • ESC firmware and program settings can be updated via PC connection (USB adapter sold separately)

INCLUDES:

  • ZTW 85A ESC with 8A SBEC
  • Pre-installed XT-60 Connector (power connector) and 4.0mm bullet (motor connector) for your convenience
  • Instruction Manual

OPTIONAL:

  • ZTW LCD Programming Card

more info: www.ztwshop.com/product/ztw-gecko-series-brushless-esc/

The Android App For ZTW WiFi programming module Free Download

The Android App For ZTW WiFi programming module Free Download

source from:

www.ztwshop.com/support/download/

www.ztwshop.com/support/download/upload/download/ElectSetting0901.apk

Mike JenkinsOwner, Jenkins Brothers RacingHometown: McKinney, Texas DOB

As the owner of Traxxas, The Fastest Name In Radio Control®, Mike has spent a lifetime around radio-controlled racing cars and trucks, and fulfilled his passion for full-size motorsports with forays into motocross, drag racing, and later, road racing with Corvettes, Miatas and other sports cars. In 2007, Mike and brother, Mark, began racing the SCCA’s Mazda MX-5 Cup series, which features specially prepared open-roof sports cars with strict “spec” rules that keep the cars very closely matched. In this highly competitive form of sports car racing, meticulous preparation and precise, consistent driving are critical to success, and are skills that translate to all racing disciplines— including off-road racing.

After a trip to Primm, Nevada for an up-close look at short-course off-road racing, Mike recognized the high-intensity motorsport as the perfect fit for Traxxas, the number-one name in hobby-class radio controlled cars and trucks. The over-the-top horsepower, incredible air-time and full-throttle driving style of short-course racing was like off-road R/C gone “full size.” Traxxas soon signed on to sponsor Pro Light champ Jeff Kincaid. Mike and Mark formed Jenkins Brothers Racing to field a two-truck Traxxas team of their own, with Mark driving a Pro 2WD truck and Mike climbing into a Pro 4X4 machine.

Despite racing against a field of drivers with far more off-road experience, Mike finished his rookie season with ten top-10 finishes, one top-five, and two third-place podium spots in seventeen starts to become the 2008 Pro-4 Rookie of the Year. In 2009, Traxxas signed on as the title sponsor of TORC, THE Traxxas Off-Road Championship. Mike finished the inaugural TORC season with five top-5 finishes and two visits to the podium. He finished third at the historic Crandon International Raceway, and capped the season with his first TORC-series win in the final round of TORC racing at Las Vegas Motor Speedway.

In 2013, Mike competed in the inagural season of the now SPEED Energy Formula Off-Road presented by Traxxas series. The close-quarters, tight racing is done in trucks that are slightly smaller than a short-course truck. Once the season was completed, Mike was back at the helm of a short-course truck exclusively.

After putting in countless hours of seat time piloting the Traxxas #47, Mike expanded his driving presence and began competing in both the Pro-2 and Pro-4 classes of The Off-Road Championship presented by Amsoil. In the 2014 season, Mike claimed 4 top-5 finishes in Pro-2 with an appearance on the podium. In Pro 4, he had 11 top-5 finishes and 3 trips to the podium. Consistency paid off as Mike finished in the top-5 in points standing at the end of the season. The momentum from this season carried into the 2015 season as Mike competed exclusively in the Pro 4 class. Several trips to the podium and top-5 finishes payed off as Mike wrapped up the season 4th in the points standing for Pro 4.

 

ZTW Brushless ESC

ZTW SP 1104-4600KV High Performance Brushless Motor

ZTW have now put out their Spider PRO premium motors, which are precision built for FPV Drone Racing.  Weight is always an issue when racing and these lightweight motors, 6.5g, are built with a CNC aviation aluminum shell. Each motor comes with a locking nut so there is no need for separate CW, CCW motors.

These motors are designed to give optimum thrust with 3” to 4” propellers. They come with thin silicon wire to ensure an easy installation.

The Spider PRO premium motors are a high-quality build with smooth, silent, powerful performance.

Features:
• CNC aviation aluminum bell
• High-temperature 200C and low resistance winding wire
• Lower internal resistance
• Higher torque, powerful output
• Original NMB bearings
• Recommended 3~4” props

Specs:
KV: 4600KV
Input Voltage: 2~3S LiPoly Battery
Recommend prop size: 3~4inch
Max Watts: 50W
Max Voltage: 8.4V
Max Current: 7A
Stator Thickness: 4mm
Poles: 9N 12P
Resistance: 0.468Ω
Idle Current at 8.4V: 0.38A
Rotor Diameter: 14.2mm
Shaft Diameter: 1.5x4mm
Bell Length: 12.5mm
Motor Wire length: 60mm
Bolt hole spacing: 9mm
Weight: 6.5g

Includes:
1 x ZTW SP series motor
2 x M2x6 mounting screws
4 x M2x4 mounting countersunk screws

www.ztwshop.com

ZTW Spider PRO Premium SP2206-2300KV Brushless Motor

ZTW have now put out their Spider PRO premium motors, which are precision built for FPV Drone Racing.  Weight is always an issue when racing and these lightweight motors, 33g, are built with a CNC aviation aluminum shell. Each motor comes with a locking nut so there is no need for separate CW, CCW motors.

These motors are designed to give optimum thrust with 5” to 6” propellers. They come with thin silicon wire to ensure an easy installation.

The Spider PRO premium motors are a high-quality build with smooth, silent, powerful performance.

Features:
• CNC aviation aluminum bell
• High-temperature 200C and low resistance winding wire
• Lower internal resistance
• Higher torque, powerful output
• Original NMB bearings
• CW thread only with locking nut
• Recommended 5~6” props

Specs:
KV: 2300KV
Recommend prop size: 5-6inch
Max Watts: 200W
Max Voltage: 16.8V
Max Amps: 20A
Stator Diameter: 22mm
Stator Thickness: 6mm
Poles: 12N 14P
Resistance: 0.0451Ω
Idle Current at 8.4V: 1.0A
Rotor Diameter: 28mm
Shaft Diameter: M5x14.5mm
Bell Length: 18.5mm
Motor Wire length: 22# 180mm
Bolt hole spacing: 16mm & 19mm
Weight: 33g

Includes:
1 x ZTW Spider Pro premium motor
1 x M5 Lock nut
4 x M3x6 mounting screws
2 x M3 washers

 

www.ztwshop.com