The Important Cordles Drill Safety Tips

Using power tools can make a tough job much easier. However, they can also make simple tasks that much more dangerous. For that reason, understanding basic safety tips when it comes to operating a power tool like a drill can make a huge impact on personal safety as well as extend the life of the tools. This guide is designed to help both experienced and new drill users by reviewing proper drill use as well as 8 important drill safety tips that all Dewalt cordless drill battery users should know. In addition, a brief discussion at the end of this guide will give users helpful drill buying tips sure to save time, money, and frustration.

Proper Drill Use

Before going over the important drill safety tips at the heart of this guide, it is necessary to review the proper use of a drill in the first place. By making sure to use the correct technique, many safety hazards can be avoided. Proper drill use can be broken down into six simple steps:

Step 1

If using a corded drill, make sure that the electrical cord is long enough to reach to the project table. If using a battery operated cordless drill, make sure that the batteries are at full charge so that the drill will remain working throughout the project.

Step 2

Insert the chuck key into the drill to open the chuck. To do this, push the key’s nubbed end into the hole located alongside the chuck. Then, turn the key counterclockwise. Doing this should cause the teeth on the chuck key to engage with the matching teeth on the drill.

Step 3

Insert the proper drill bit into the chuck. Then, turn the chuck key clockwise to tighten it. Make sure that the bit is snug inside the chuck.

Step 4

Plug in the drill or attach the battery to its base and press the trigger to make sure everything is operating as expected. Do this before touching the Milwaukee cordless drill battery to the piece of work in order to avoid damage should something malfunction.

Step 5

Slowly press the drill bit down into the material. Make sure to apply a steady, light pressure. Maintain this pressure as well as keep the trigger engaged until the hole is drilled through completely.

Step 6

Without disengaging the trigger, slowly remove the drill bit from the material. Do this until the bit has completely cleared the hole. This will prevent the drill bit from getting stuck in the material just drilled.

Once a user is confident in the basic steps for proper drill use, it is necessary to take additional safety precautions in order to avoid injury while drilling. When users employ the proper techniques discussed above, these eight safety tips will help to keep the user safe.
1. Dress Properly

Prevention is the most important safety step anyone can take. This is just as true when working with power tools as it is when working with hand tools. Because of the rotary nature of power drills, specific precautions in terms of attire should be followed. This includes avoiding baggy clothing and long sleeves, pulling back long hair, and always wearing safety goggles.
2. Prepare the Drilling Space

Once the drill user is properly outfitted, the drilling space must be properly outfitted as well. This involves the physical space where a user plans to drill as well as the environment surrounding that space. Make sure children and pets are clear of the drilling area for their own safety as well as the safety of the drill operator. Becoming distracted while operating a power tool is a sure way to get hurt. In addition, remove any extraneous material from the area being drilled, especially loose material that could easily be sucked up into the rotating drill bit.
3. Charge the Drill Properly

Again, the steps taken before even handling the drill itself are essential to proper drill safety. When it comes to a cordless drill, which operates using a large battery pack at its base, this means properly preparing the drill battery before use. The temperature in the battery charging area should not be too cold or too hot as this could lead to a frozen or otherwise inoperable battery. Batteries that are too hot or too cold could malfunction once hooked into a drill.
4. Handle the Drill Properly

When moving the drill from the toolbox to a workspace, the way in which the user carries the unit is important. Power drills should always be carried by their base, not their tip where the bit is inserted. However, it is also important to never carry a drill by its trigger. Otherwise, an unsuspecting object or individual may get hurt. Drills with removable batteries should always remain separate from the battery units themselves until just before use.
5. Check the Drill

Similarly, before even setting up for a project, make sure that the drill itself is in working order. Even drills that have been successfully used before could have been knocked around and broken since their last use. It is also important to register any new drill purchased with its manufacturer and routinely check for recalls.

6. Secure the Piece

Equally important to the safety and security of the drill itself is the safety and security of the piece that is to be drilled. Secure loose items like boards or metal sheets with a clamp or other heavy object. This will serve the dual purpose of keeping the material steady so that the hole is put in the proper place as well as securing the material so it does not fly away and hit someone.

7. Drill Pilot Holes or Use a Center Punch

Either drilling pilot holes for screws or using a center punch, which marks where a hole needs to be drilled, is an important step in safety as well as drilling accuracy. A center punch will provide a small indentation in the wood which will orient the drill and also prevent slippage once the drilling has commenced.

8. Mark the Depth

Finally, when a user needs to drill holes of a particular depth into a larger piece of material it is important to mark that depth onto the drill bit itself. This way, the user can be sure to accurately drill without going over and ruining a project or going under and needing to start again. A great way to mark this depth is to do so with a thin piece of electrical tape wrapped around the bit at the proper depth which will clearly alert the user to when the depth has been reached.

Buying a Drill

Safety is of the utmost importance any time one is using a power tool, and safety starts with making sure that the tool itself is in the best possible condition. This starts when a power drill and the associated drill bits are purchased in the first place. In today’s market, there are literally dozens of choices for purchasing a Ryobi cordless drill battery or any other power tool. This includes traditional hardware stores, big box retailers, and tool supply chains. However, to combine choice, convenience, and price, savvy shoppers may want to look into buying a drill on

How to Shop for a Drill on eBay

The eBay marketplace is home to more than 100 million active users that includes both buyers and sellers. Signing up for an account is easy and includes the use of PayPal, a secure payment system that protects personal financial information by keeping it just between buyers and PayPal.

Once this process is complete, users can begin the search for a drill through eBay’s Home & Garden Shop. There is a special section dedicated to power tools, which includes accessories like drill bits along with a huge selection of both cordless and corded drills. Searching for the right drill or drill accessory is as simple as scrolling through these pages or conducting a basic or advanced search right from the eBay home page.


Working with power tools is a great way to save time and effort when completing a project at home or on the job. The benefits of modern technology allow jobs to get done more quickly and workers to pay more attention to the details that make a project great. However, there are also inherent dangers that come from working with power tools since their strength poses more of a risk than traditional hand tools of the same nature.

When it comes to operating a drill, safety starts with proper technique. This guide began by discussing drilling technique in six easy steps. After technique is understood, however, there are an additional 8 important drill safety tips that any operator must learn and abide by. This includes preparing oneself for the project, properly treating the drill itself, as well as taking precautions while using the drill. By following these tips and using quality drills and accessories acquired from reliable sellers on sites like eBay, drill users can rest assured that they will be not only be effective in their efforts, but also be safe.

This entry was posted in drill battery care. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *