sbmzhcn Blog find crusher and grinding mill in China

September 3, 2010

Cone Crusher types

Filed under: Uncategorized — Tags: , , , — sbmzhcn @ 1:22 pm

image Cone Crusher Features:
(1) hydraulic system
This machine has a hydraulic system to adjust the crusher on the size of the row of mines, hydraulic system can effectively ensure the safe operation of equipment. A foreign body in the crushing chamber, the dynamic cone hydraulic system can automatically lower back, when the foreign body and excreted, under the system to automatically reset back of the moving cone. Back row to keep the original location of mine I continue to work.
(2) crushing chamber type
Crushing chamber type is fixed cone and fixed cone of Q form the geometric space. Crushing chamber shape on the overall performance greatly. Crusher chamber type is the major technical indicators broken. Crushing machine design from the rough broken into four specifications of the cavity, it has six possible combinations, which means that it is best suited for their unique requirements.
(3) reliable seal
With labyrinth seal, replacing the previous use of the water seal, so that dust and impurities can enter the body machine, thus ensuring the Run edible vegetable oil for cleaning, extended plain bearings, thrust ball bearings of life, making the machine reliable operation.
(4) easy to change
The past, wall crusher to replace broken very slowly, cone crusher broken new structure to replace the wall very quickly. Because of the broken wall with card shoot, put broken bolts from the top of the wall fixed. Under the broken wall fixed hydraulic nut is tightened. On the back under the broken wall materials do not need to add any padding, so rapid change, the reduction labor intensity.
(5) regulate the opening
Machine selected high pressure of the displacement sensor, adjust the row of mine mouth location is carried out in the operating room. As long as a button, there is shown in the operating table, you can see the need to adjust the row size of mine mouth, is very convenient and accurate. Machine work, motor through the fluid coupling, a small bevel gear drive eccentric sleeve at the bottom of a large gear, so that eccentric rotation, resulting in broken cone material for rotary swing. Crushing machine spindle is fixed, the only branch Shan spherical bush, breaking force to bear. As the broken shaft and the eccentric sleeve fixed broken power transmission, so the structure can withstand a greater breaking force, crushing and fine crushing of the well adapted, because the fine broken broken power is very great. Expected product size (for ultra-petty-type liner) open up when a 5m 2 50 ^ 80% (depending on the nature of materials vary). The crusher for crushing the third paragraph of the metal mine concentrator, or the fourth paragraph break; used in building material or non-metallic mining and civil engineering. Especially civil engineering required for natural sand shortage areas.

Cone crusher to the most representative of the number of symons cone crusher image

Cone Crusher nesting population smaller, mixed with a compound of the non-broken things easier cause of the accident, and because, the crushing operation on the marker size demanding to be adjusted in the liner wear in time after the nesting population, which tapered Crusher insurance and adjusting device is more necessary than the primary crushing operations. Simon spring cone crusher overload the insurance, the conical shell to force the compression spring to increase their own in order to increase the nesting population, and expel non-broken material. Nesting population set to be adjusted by adjusting, turn the adjustment sleeve solid shell can be filled with the help of the cylindrical shell on the thread to bring up or down to change the nesting population size. Hydraulic Cone Crusher way of insurance and adjustment of the same Hydraulic Gyratory Crusher.

Hydraulic Cone Crusher
Hydraulic Cone Crusher is the introduction of the latest technology developed in Germany with the world advanced level of high-energy cone crusher, which not only improves the production capacity and crushing efficiency, but also expanded the range of applications, from limestone to basalt cone crusher
Rock, stone production to a variety of ore from the crushing, all of which can be broken in, fine, super-crushing operations to provide unparalleled fragmentation performance. Mine construction industry in today’s alternative spring cone crusher and update general hydraulic cone crusher of the latest generation of products is a large broken stones factory and mining the best equipment.

August 28, 2010

What kind of technical features of the CS Series Cone Crusher ?

Filed under: Uncategorized — Tags: , , , — sbmzhcn @ 2:07 am
Technical Features of CS Series Cone Crusher

1、 high performance

With the better cavity design and combination of the reasonable speed and stroke ,the cone crusher can make more power under the same flexible cone .Therefore ,this kind of cone crusher have higher performance and production capability compared with the similar cone crusher .

2、better particle components

With the principle of layer crushing ,the final products features high cubic shape ratio ,low ratio of needle shape stone ,and more even particle size .

3、high stability

When some non-crushing materials like the iron enter the machine ,the iron-pass protection equipment will automatically release them and then return the original position .And the iron-pass protection equipment have the fixed discharge opening returning point so that it can return to the original discharge opening after the non-iron materials pass the crushing cavity .

4、 convenient cavity cleaning

If the crusher stop the working function under the overloading condition ,the hydraulic cavity cleansing system will quickly clean the crushing cavity ,which will greatly reduce the off-time .

5、 high reliability

we adopt large ram spindles ,heavy main machine frame and independent light oil automatic control lubrication system ,which ensure the robust equipment structure and reliable function .

6、onvenient maintenance and operation

All of the spare parts can be torn apart from the top and side board and so did the fixed and flexible cone .And the bronze slide bearing can maintain the quality bearing capability under the condition of high impact shaking crushing condition and also features more economic and convenient maintenance than the rolling bear .

7、low production cost

With the high production capability reliability , and convenient maintenance ,it greatly reduce the production cost .

8、wide application

CS series Symons cone crusher can make its full advantages to apply various crushing crafts from the super coarse to the fine crushing , from the fixed crushing to the mobile crushing .
CS series Symons cone crusher have a wide crushing cavity choice from super coarse crushing to the fine crushing ,which means we can choose the crushing cavity by the crushing crafts .

9、We adopt the segregate and multi-point control independent light-oil lubrication system to ensure the double-protection of its bearing ,thus realizing the automatic protection of the whole machine .

Permalinks: blog.rockscrusher.com/product-knowledge/what-kind-of-technical-features-of-the-cs-series-cone-crusher.html

August 27, 2010

symons cone crusher used widely in mining equipment

Filed under: crusher,stone crusher — Tags: , , , — sbmzhcn @ 2:16 am
Symons cone crusher Overview

As the worlds earliest cone crusher , the Symons cone crusher features widest application and largest storage in the world .And based on the optimized improvement ,the Symons cone crusher features more reasonable and advanced ,which have appeared excellent performance in the manufacturing ,installation, and maintenance and so on. And also the Symons cone crusher adopt the novel design principle and the new idea crushing technology, which can satisfy the crushing with various specifications .And the Symons cone crusher also satisfy the new -craft requirements of “ more crushing and less grinding”.
Symons cone crusher is widely applied in cement making industry, building, sand making, metallurgical industry, etc. The cone crusher from China is suitable for both metallic minerals and non-metallic minerals, such as iron ore, nonferrous metal ore, granite, limestone, quartzite, sandstone, pebble, etc.

The JOYAL Symons Cone Crusher is a high-performance models optimized and improved on the basis of Symons Cone Crusher. The Symons Cone Crusher is widely used for secondary and fine crushing in the fields of mining, building materials, metallurgies and so on. The Symons Cone Crusher can crush materials with middle and high hardness, such as, metal ore, basalt, granite, limestone, cobblestone, sandstone and so on.

Features Of The Symons Cone Crusher  in my company Shanghai Joyal Mining Machinery Co., Ltd.:

1. Customers can choose suitable crushing chamber according to the material feature, finished product fineness and particle size requirement.
2. Unique dustproof and sealing structure extend cycle of lubricants replacement and spare parts service life
3. The key parts are made of special materials, which support the strong crushing.
4. With long crushing arm, big stroke, strong crushing, and high capacity.
5. Hydraulic chamber cleaning system, easy operation, and reduce machine halt time.
6. With reliable performance, low investment cost, and long service life of wearing parts.

August 23, 2010

symons cone crusher used widely in mining equipment

Symons cone crusher Overview

As the worlds earliest cone crusher , the Symons cone crusher features widest application and largest storage in the world .And based on the optimized improvement ,the Symons cone crusher features more reasonable and advanced ,which have appeared excellent performance in the manufacturing ,installation, and maintenance and so on. And also the Symons cone crusher adopt the novel design principle and the new idea crushing technology, which can satisfy the crushing with various specifications .And the Symons cone crusher also satisfy the new -craft requirements of “ more crushing and less grinding”.
Symons cone crusher is widely applied in cement making industry, building, sand making, metallurgical industry, etc. The cone crusher from China is suitable for both metallic minerals and non-metallic minerals, such as iron ore, nonferrous metal ore, granite, limestone, quartzite, sandstone, pebble, etc.

The JOYAL Symons Cone Crusher is a high-performance models optimized and improved on the basis of Symons Cone Crusher. The Symons Cone Crusher is widely used for secondary and fine crushing in the fields of mining, building materials, metallurgies and so on. The Symons Cone Crusher can crush materials with middle and high hardness, such as, metal ore, basalt, granite, limestone, cobblestone, sandstone and so on.

Features Of The Symons Cone Crusher  in my company Shanghai Joyal Mining Machinery Co., Ltd.:

1. Customers can choose suitable crushing chamber according to the material feature, finished product fineness and particle size requirement.
2. Unique dustproof and sealing structure extend cycle of lubricants replacement and spare parts service life
3. The key parts are made of special materials, which support the strong crushing.
4. With long crushing arm, big stroke, strong crushing, and high capacity.
5. Hydraulic chamber cleaning system, easy operation, and reduce machine halt time.
6. With reliable performance, low investment cost, and long service life of wearing parts.

July 27, 2010

crusher machine and stone crusher

Lithotripter(crusher )is the exclusive compound content of particles larger than 3 mm of the total emission rate 50% or more of the crushing machine. Operations often broken by feeding and nesting into coarse grain size of the broken, the broken and petty. Gravel equipment commonly used jaw crusher, jaw crusher, impact crusher, impact crusher, compound crusher, single-stage hammer crusher, vertical crusher, gyratory crusher, cone crusher machine, roll crusher, double roll crusher, combo breaker, a molding machine broken several.

Jaw Crusher jaw plate on the use of two materials extrusion and bending and breaking all kinds of coarse broken or hardness of the material in the crushing machine. The broken body from the fixed jaw plate and movable jaw plates, jaw plates close to the time when the two materials Jibei broken jaw plate away when the two nesting population is less than block from the bottom of the discharged material. It’s crushing action is carried out intermittently. This crusher due to simple structure, reliable and can be broken advantages of hard materials are widely used in mineral processing, construction materials, silicate and ceramics industries.

80 to 20 of the 20th century, 800 tons of material per hour, breaking a large jaw crusher to a particle size has reached approximately 1,800 mm. Commonly used jaw crusher with elbow board and two single brackets. The former moving jaw at work only a simple swing arc, so called simple swing jaw crusher; the latter for the swing arc to move up and down also, so called complex swing jaw crusher. Jaw Crusher widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry and other sectors, breaking strength no more than 320 MPa of various materials.

Single-plate jaw broken elbow mobile jaw plate up and down movement to promote the role of nesting, and its level of travel is greater than the upper part of the lower part of bulk materials easily broken, so the broken above the elbow plate efficiency. The disadvantage is that jaw plate wear faster, and the materials have been smashing the spontaneous increase in energy consumption. In order to protect the important parts of the machine is not damaged due to overload, and often the shape of the small size of the brackets designed for weak links, overload the machine when it first deformation or fracture.

In addition, to meet the requirements of different marker size and compensation jaw plate wear and tear, but also the addition of nesting population adjustment device, usually in brackets after the frame between the seat and adjust the pads or radiotherapy, wedge. However, in order to avoid damage to replace broken parts to affect production, but also can be used hydraulic equipment to achieve security and adjustment. Some jaw crusher also has a direct hydraulic drive to drive fixed jaw plate, to complete the materials in the crushing action. These two types of hydraulic transmission equipment jaw crusher, often referred to as hydraulic jaw crusher.

Gyrating crusher cone crusher is used in the shell cavity of the cycle within the cone movement of materials generated extrusion, splitting and bending and hardness of coarse broken all kinds of large-scale ore or rock crushing machinery. Broken cone axis with the upper bearing bush in the middle of the beam, the lower end of the eccentric sleeve is placed in the hole. Sleeve rotates around the broken cone axis for eccentric cycle exercise machine of its crushing action is continuous, and therefore the efficiency of higher than jaw crusher. To the early 70s, large gyratory crusher has been able to handle material per hour, 5,000 tons, the largest feeding up to 2,000 mm diameter.

Gyratory Crusher two ways to achieve nesting population adjustment and overload insurance: the first is using mechanical means, the spindle nut to adjust the top, rotate adjusting nut, cone can be broken down or up, so I followed changes nesting bigger or smaller, overloaded, by cutting off the pin on the drive pulley to achieve insurance; The second way is to use hydraulic breakers hydraulic cycle, the spindle is located in the hydraulic cylinder of the plunger, the change under the plunger hydraulic oil can change the volume up and down the cone crusher location, thus changing the nesting population size. Overload, the spindle downward pressure to force the plunger into the hydraulic oil under the accumulator in the hydraulic system so broken down cone to increase the nesting along the mouth of material discharged into the crushing chamber with a non-broken materials (iron, wood, etc.) in order to achieve security.

Cone crusher crusher working principle and the same cycle, but only in the crushed or broken mechanical crushing operations. In nesting crushing operations than the general uniformity of size pieces operational requirements of the high rough, so the lower part of the crushing chamber shall be a parallel to the area, while also speeding up the cycle speed cone crusher for material in the parallel area squeezed by more than one within.

Comparison of crushing operations in the crushing operation of a large coarse broken, so broken loose of its larger volume have increased. To prevent the crushing chamber may give rise to obstruction, without increasing nesting population to ensure that the necessary premise of size marker to be broken by increasing the diameter of the bottom cone to increase the total cross section marker.

Cone Crusher nesting population smaller, mixed with a compound of the non-broken things easier cause of the accident, and because, the crushing operation on the marker size demanding to be adjusted in the liner wear in time after the nesting population, which tapered Crusher insurance and adjusting device is more necessary than the primary crushing operations.

Symons cone crusher overload the insurance, the conical shell to force the compression spring to increase their own in order to increase the nesting population, and expel non-broken material. Nesting population set to be adjusted by adjusting, turn the adjustment sleeve solid shell can be filled with the help of the cylindrical shell on the thread to bring up or down to change the nesting population size. Hydraulic Cone Crusher way of insurance and adjustment of the same Hydraulic Gyratory Crusher.

Roll crusher is to use the friction of the roll surface to bite into the broken areas of materials, so bear squeeze or split and broken machinery. When broken or needs to be increased for coarse crushing ratio, often made in the roll surface of the teeth or grooves to increase the splitting effect. Roll crusher is usually divided by the number of roller single roll, double roll and multi-roller crusher, suitable for primary crushing, breaking or crushing of coal, limestone, cement clinker and stone in the long and soft materials.

Hammer crusher is to use high-speed impact hammer effect on the material for the broken and broken mechanical crushing operations. Articulated high-speed rotating hammer rotor, the lower body with grate bars to control the size marker. First of all the materials into the crusher by the high-speed movement of the hammer impact and the initial break, and also get the kinetic energy, high-speed flying broken plate on the casing wall being broken again. Smaller than the gap of the material grate bars are from outside, is larger than expected gap grate bars in the grate bars on the block again, the impact and grinding by the hammer, until the gap is less than grate bars after being discharged.

Hammer crusher with crushing ratio, uniform particle size marker, less than smashing things, lower energy consumption. However, hammer wear faster, the hard crushing of the applications was limited; another plug because fear of grate bars, not in Congress and the humidity with it crus
hing materials with clay. This crusher is usually used for crushing limestone, shale, coal, gypsum, chalk and other materials in the brittle and soft.

The hammer crusher hammer for the steel ring of the ring coal crusher, hammer crusher is a variant. It uses high-speed impact and the combination of low-speed rolling to break material, and thus obtain more detailed product, mainly used for the crushing of coal power plants, but can also be used for gypsum, salt, chemicals and some crushing of hard materials.
Impact Crusher is the use of panels of high-speed impact hammer rebound effect and the counter plate so that the impact of material broken by repeated mechanical. Hammer solid plate installed in the high-speed rotation of the rotor, and along the crushing chamber by a number of different angles, block counter board layout.

Materials into the role of zone plate hammer by the board before the first hammer impact and the initial break, and also get the kinetic energy, high-speed counter board rushed. Plate collision with the counter material broken again, bounced back to hammer the role of board area, by the board to re-hammer impact. Is repeated until it is broken into the required size and discharged outside the machine. Compared with the hammer crusher, impact crusher broken than the larger and more fully utilize the high-speed impact energy throughout the rotor. However, as easily wear plate hammer, it shattered in the application of hard materials is restricted, often used to rough broken, in pieces or crushing limestone, coal, calcium carbide, quartz, dolomite, iron pyrites, gypsum and chemical raw materials so in the hard-brittle materials below.

Ring hammer crusher main purposes:
The series of hammer crusher is suitable for crushing all kinds of brittle materials, such as coal, coal Chin, coke, slag, shale, loose limestone. The compressive strength of materials, not more than 10MPa, the surface water is not more than 8%.
Winnowing hammer crusher used in construction materials, brick, coal, metallurgy, mining, power, light industry and other industrial sectors, for crushing coal, shale, coal, carbon, lime, cement guessed, Peng Yun-soil and in hard-brittle materials.
Described above, several gravel sand production line equipment and production line stone crusher equipment is essential.
Jaw crusher for cement, coal preparation, power generation and building materials to meet the crushing medium hard and brittle materials such as limestone and coal. Maximum compressive strength of not more than 1500kg/cm2.

Powered by WordPress

Optimization WordPress Plugins & Solutions by W3 EDGE